Jura Capresso 13637 manual Preparing two specialty coffees, Latte macchiato, cappuccino

Preparing two specialty coffees

Latte macchiato, cappuccino

Preparation

To prepare two specialty coffees, either use the product selector or press the appropriate preparation button twice (within approximately

seconds).

Example: Proceed as follows to prepare two coffees (using product selector).

T Place two cups under the coffee spout.

gT Turn the Rotary Switch to view the product selector.

g T Turn the Rotary Switch until ‘ coffees’ is displayed.

kT Press the Rotary Switch.

Coffee preparation starts. The preset amount of water for coffee flows into the cups.

Preparation stops automatically. ‘Please select product:’ appears on the display.

EProceed as follows to prepare two cups of coffee at the touch of a button: Place two cups under the coffee spout. Press the ‘Coffee’ button twice (within approximately seconds) to start coffee preparation.

Your IMPRESSA can prepare a latte macchiato or cappuccino at the touch of a button. There is no need to move the glass or cup.

Example: Proceed as follows to prepare one latte macchiato.

Precondition: ‘Please select product:’ is displayed. Milk is connected to the cappuccino frother.

T Place a glass under the cappuccino frother.

TTurn the setting wheel of the cappuccino frother to the Milk Foam position ü.

T Press the ‘Latte macchiato’ button.

‘Latte macchiato’, the milk foam is prepared.

Preparation stops automatically when the preset amount of milk is reached.

EThere is a short interval while the hot milk separates from the milk foam. This allows the typical layers of a latte macchiato to form. You can choose the length of this interval in program- ming mode (see Chapter ‘Permanent settings in program- ming mode – Product settings’).