Jura Capresso 13637 manual Dismantling and rinsing, the cappuccino frother, ‘Maintenance status /’

Maintenance

T Empty the other receptacle and place it under the cappuc- cino frother again.

T Press the ‘Next’ button.

‘Milk system is being cleaned.’, the cappuccino frother and the pipe are rinsed with fresh water.

‘Please select product:’ appears on the display.

Dismantling and rinsing

the cappuccino frother	T Carefully pull the cappuccino frother down and off.
	T Dismantle the cappuccino frother into its individual parts.
	T Rinse all parts of the cappuccino frother thoroughly under
	running water.
	T Reassemble the cappuccino frother.

EEnsure that all individual parts are correctly and firmly con- nected to ensure correct operation of the cappuccino frother.

T Firmly attach it to the connector.

Inserting and activating Your IMPRESSA no longer has to be descaled if you are using the

the filterCLEARYL Pro Blue filter cartridge. If the water hardness is ° dH or more, we recommend using the filter cartridge. If you do not know the hardness of your water, you can find this out first (see Chapter ‘Preparing and using for the first time – Determining the water hard- ness’).

If you did not activate the filter cartridge the first time you used the machine, you can do this now as follows.

EPerform the ‘inserting the filter’ operation without any inter- ruptions. This will ensure that your IMPRESSA always produces its best.

Precondition: ‘Please select product:’ is displayed.

OT Press the P button.

‘Maintenance status (/)’

gT Turn the Rotary Switch until the program item ‘Maintenance

settings (/)’ is displayed. T Press the ‘Filter’ button.

‘Filter’

T Press the ‘Active’ button.