Jura Capresso IMPRESSA S9/S7 manual Economy mode, Setting the time

Press the Rotary Switch (4) to leave the programming mode.

 SELECT PRODUCT

13.9 Economy mode

You can set your machine to various power saving modes.

 SELECT PRODUCT

Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.

 FILTER

NO or YES

Turn the Rotary Switch (4) until the following message is dis- played:

 ECONOMY

MODE –

Now press the Rotary Switch (4) to start programming.

 ECONOMY

MODE -

Now turn the Rotary Switch (4) until the required economy mode is displayed.

 ECONOMY

MODE 2 (example)

Confirm the selected setting by pressing the Rotary Switch (4).

 ECONOMY

MODE 2 (example)

Now turn the Rotary Switch (4) until the following message is displayed:

 EXIT

Now press the Rotary Switch (4) to leave the programming mode.

 SELECT PRODUCT

Economy mode –

Selecting this level puts the IMPRESSA in constant stand-by mode.

This setting allows you to make any of the products without having to wait for the machine to heat up.

Select this setting if you want to make a lot of coffees with E hot or frothed milk and do not want to wait for the machine

to heat up first.

Economy mode 1

Selecting this level puts the IMPRESSA in constant stand-by mode for making coffee. The machine is heated up separately if you need steam for hot or frothed milk.

Select this setting if you make mostly black coffees and are prepared to wait for approx. 1 minute before being able to draw steam.

Economy mode 2

Selecting this level does not put the IMPRESSA in stand-by mode (economy temperature). The machine heats up each time you make coffee or need to draw steam.

The IMPRESSA switches to economy temperature 5 minutes after you last used it.

Select this setting if you make very few coffees (with or without milk) and are prepared to wait for approx. 30 sec- onds for the machine to get ready.

13.10 Setting the time

You must program the time if you want to use the automatic switch-on function.

17