Jura Capresso IMPRESSA S9/S7 manual Drawing off steam, Frothing milk

The amounts given in ML are approximate values and may vary from the effective quantity.

10. Drawing off steam

To ensure perfect operation, clean the 2-stage frothing jet (24) regularly. Screw the jet off as described. Hold the jet at the top and at the bottom end and screw it apart (Fig. 14). Thoroughly rinse the 3 parts under running water.

Steam can be used for heating liquids and frothing milk for cappuccino. When heating liquids, make sure the 2-stage frothing jet (24) is pushed up. Push the frothing jet down (Fig. 5) to heat liquids.

A small amount of water leaks from the jet when you start frothing. This does not affect the result, e.g. when frothing milk.

There might be some initial splashing when drawing off steam. The steam jet gets hot. Avoid direct contact with the skin!

 SELECT PRODUCT

Place a cup under the pivoting steam spout (23) and dip the 2-stage frothing jet (24) in the milk to be frothed or the liquid to be heated.

Press the Steam Portion key .

 STEAM PORTION

You can stop the process any time by pressing the Steam Portion key .

 SELECT PRODUCT

You can set the duration of drawing off steam in 1-second increments with the Rotary Switch (4).

11. Frothing milk

The IMPRESSA is ready to froth milk when both Steam key lights

light up constantly.

If the lights are off, press one of the two Steam keys .

11.1Frothing one portion of milk (with the 2-stage frothing jet)

 SELECT PRODUCT

Pour milk into a jug or similar receptacle.

Dip the 2-stage frothing jet (24) into the milk and press the key.

 STEAM PORTION

The steam dispensing process stops automatically.

11.2Frothing milk

(with the 2-stage frothing jet)

 SELECT PRODUCT

Pour milk into a jug or similar receptacle.

Dip the 2-stage frothing jet (24) into the milk and press the key.

 DRAW OFF STEAM

When you have frothed the milk to your liking, pres the key again.

11.3Attaching the Professional-Cappuccino Frother to the IMPRESSA*

Remove the 2-stage frothing jet (24).

Now attach the Professional-Cappuccino Frother (Fig. 6).

Press the hose into one side of the opening behind the dial (Fig. 7).

12 *The Professional-Cappuccino Frother is optional with the IMPRESSA S7 avantgarde.