Jura Capresso IMPRESSA S9/S7 manual Programming the water portion, Programming the steam portion

 TEMPERATURE NORMAL (example)

Now turn the Rotary Switch (4) until the required temperature is set.

 TEMPERATURE

HIGH (example)

Confirm the selected setting by pressing the Rotary Switch (4).

 TEMPERATURE

Now turn the Rotary Switch (4) until the following message is displayed:

 EXIT

Now press the Rotary Switch (4) to leave the programming mode.

 SELECT PRODUCT

13.7 Programming the water portion

The system’s basic settings include a pre-defined amount of water (225 ml). However, this amount can be modified as required.

 SELECT PRODUCT

Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.

 FILTER

NO or YES

Turn the Rotary Switch (4) until the following message is dis- played:

 WATER

PORTION

Press the Rotary Switch (4) to activate the program item.

 PORTION

225 ML (example)

Turn the Rotary Switch (4) to adjust the amount of water and then confirm your setting by pressing the Rotary Switch (4).

 WATER

PORTION

Turn the Rotary Switch (4) until the following message is dis- played:

 EXIT

Press the Rotary Switch (4) to leave the programming mode.

 SELECT PRODUCT

13.8 Programming the steam portion

The system’s basic settings include a pre-defined steam portion (20 sec.). However, this amount can be modified as required.

 SELECT PRODUCT

Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.

 FILTER

NO or YES

Turn the Rotary Switch (4) until the following message is dis- played:

 STEAM

PORTION

Press the Rotary Switch (4) to activate the program item.

 PORTION

20 SEC (example)

Turn the Rotary Switch (4) to modify the steam portion and then confirm your setting by pressing the Rotary Switch (4).

 STEAM

PORTION

Turn the Rotary Switch (4) until the following message is dis- played:

 EXIT

16