IMPRESSA S9 avantgarde: The supplied “Deluxe” milk pitcher is suited for drawing in the milk.
11.4Making cappuccino and hot milk with the
Fill the milk pitcher with milk or dip the milk hose directly into the milk.
Place a cup under the
Press the Steam Portion key 
.
STEAM PORTION
The machine will froth or heat milk according to the time you programmed (see “Programming the steam portion”, Chapter 13.8)
For cappuccino, turn the selector switch (1, Fig. 7) to (2).
For hot milk, turn the selector switch (1, Fig. 7) to (3).
Now place the cup with the cappuccino froth or hot milk under the coffee spout (18) and make a coffee of your choice.
11.5Cleaning the Professional-Cappuccino Frother and jet *
After heating or frothing milk, you should clean the Profes-
Your IMPRESSA will not prompt you to clean the Profes-
The
Fill water into a receptacle and dip the milk hose into it.
Draw steam until the water / steam from the Frother runs clear.
We also recommend regularly disassembling the Frother and rinsing it under running water.
Remove the | E | |
SA and take it apart as shown in Fig. 8. | ||
|
Thoroughly rinse all the parts of the
12. Switching the IMPRESSA S9/S7 avantgarde off
Switching the IMPRESSA off causes the coffee spout to be rinsed first. Therefore, please make sure to place a suitable receptacle un- der the coffee spout (18).
SELECT PRODUCT
Switch the IMPRESSA off with the ON / OFF key 
(11).
MACHINE RINSING
The coffee spout (18) is rinsed.
13. Programming
The IMPRESSA leaves the factory with a number of default settings that allow you to make coffee without having to pro- gram the machine first. You can, however, adjust various parameters to make the coffee suit your personal taste.
The following parameters can be adjusted:
Filter
Water hardness
Rinse
Powder quantity
Water quantity
*The | 13 |
