Now press the Rotary Switch (4) to leave the programming mode.
SELECT PRODUCT
If the IMPRESSA is switched off with the power switch (27), you will need to set the time again next time you switch the machine on. The machine will prompt you to do so.
13.12 Programming the automatic switch-off time
SELECT PRODUCT
Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.
FILTER
NO or YES
Turn the Rotary Switch (4) until the following message is dis- played:
OFF AFTER
5HRS
Now press the Rotary Switch (4) to start programming.
OFF AFTER
5HRS
Turn the Rotary Switch (4) to set the
OFF AFTER
4HRS (example)
Confirm the set
(4).
OFF AFTER
4HRS
Now turn the Rotary Switch (4) until the following message is displayed:
EXIT
Now press the Rotary Switch (4) to leave the programming mode.
SELECT PRODUCT
13.13 Programming the language
SELECT PRODUCT |
| |
Open the programming door (3). Press the Rotary Switch (4) |
| |
| until you hear an acoustic signal. | E |
FILTER | ||
| NO or YES | |
|
|
Turn the Rotary Switch (4) until the following message is dis- played:
LANGUAGE
ENGLISH
Now press the Rotary Switch (4) to start programming.
LANGUAGE
ENGLISH
Turn the Rotary Switch (4) to set the language.
LANGUAGE
ENGLISH (example)
Confirm your selection by pressing the Rotary Switch (4).
LANGUAGE
ENGLISH
Now turn the Rotary Switch (4) until the following message is displayed:
EXIT
Now press the Rotary Switch (4) to leave the programming mode.
SELECT PRODUCT
13.14 Programming the display
This program item allows you to change the time format from 24 hrs. to AM/PM and the units from ml (millilitres) to oz (ounces).
SELECT PRODUCT
19