Jura Capresso S90, S95 Constant frothing up of milk, Cleaning the Auto-Cappuccino, Programming

11.2 Constant frothing up of milk

Pour milk into a milk container and immerse the intake-tube in the milk.

Put a cup under the pivoting nozzle (20) and press key . Your milk froths up.

 STEAM INTAKE

When the required amount of froth has been attained push selec- tor key anew.

 COFFEE READY

With the flow-adjustment (S90/S95) you can set the optimum frothing. Turn the handle slightly to the right or to the left until you obtain the required result.

11.3Drawing off hot milk using the

Profi Auto-Cappuccino/Caffè Latte S9, 601

The Profi Auto-Cappuccino/Caffè Latte of the S9, 601 can be used to draw off hot milk. Adjust the selector lever (1) (Fig. 10) to position (3) to draw off hot milk.

Install the Profi Auto-Cappuccino/Caffè Latte. This is in- cluded in your Welcome Pack.

11.4Drawing off cappuccino using the

Profi Auto-Cappuccino/Caffè Latte S9, 601

The Profi Auto-Cappuccino/Caffè Latte of the S9, 601 can be used to draw off capuccino. Adjust the selector lever (1) (Fig. 10) to position (2) to draw off capuccino.

11.5Controlling the temperature using the Profi Auto-Cappuccino/Caffè Latte S9, 601

Adjust the selector lever (1) to + for hot milk/cappuccino or - for less hot milk/cappuccino. Individual fine adjustment is possible.

11.6 Cleaning the Auto-Cappuccino

As soon as you have frothed enough milk, it is important to clean the Auto-Cappuccino.

Fill water in a milk container and immerse the intake-tube in the water. Now draw off steam until the water/steam mixture flowing into your cup is completely clean. Your Auto-Cappuccino is clean again.

Remove Auto-Cappuccino (21). If you do not achieve optimum results, disassemble the flow controller and the selector lever (Fig. 10 for S9, 601). Thoroughly rinse these parts with water.

12. Switching off machine

When the machine is switched off, the rinsing program is auto- matically run again. Therefore place an empty container under the coffee-spout (15) and press ON/OFF key . When the rinsing water has run into the container, the machine powers down. Dis- card the water.

13. Programming

Before leaving our factory, the machine is adjusted to enable you to obtain coffee without any additional programming. In order to adapt the result to your personal taste, various settings can be pro- grammed individually. The programming keys are located behind the front cover (3).

12