Pull down cartridge mounting, until it engages audibly.

Fill water tank with cold, fresh tap-water and replace it.

Switch the machine on by pressing key ON/OFF.

Open front cover (3) and press key P until you hear an acoustic signal.

 PRESS KEY / POWDER QUANTITY

Press key + several times until the following message appears:

 FILTER NO

By pressing key P you can hear an acoustic signal.

 NO flashes

You can alter the setting by pressing key - or + .

 YES flashes

To confirm press key P . An acoustic signal can be heard.

 RINSE FILTER / PRESS STEAM

Place a sufficiently large container (approx. 1 litre) under the pivoting nozzle (20) and press coffee key .

 PLEASE WAIT / FILTER RINSING. The drawing off of water will stop automatically.

 FILTER YES

Press key N .

 COFFEE READY

The water might be slightly discoloured (this is not damag- ing to the health).

7.2 Replacing of filter

After drawing off 50 litres the filter loses its effect.

 REPLACE FILTER

If only a little water is drawn off the filter should be changed every 2 months. However no message will appear on the display. You will find a special turntable on the cartridge mounting to set the replacement date.

Empty water tank and pull up cartridge mounting. Pressing lightly, place the filter cartridge in the water tank (Fig. 2).

Pull down cartridge mounting, until it engages audibly.

Fill water tank with cold, fresh tap-water and replace it.

Switch the machine on by pressing key ON/OFF .

Open front cover (3) and press key , until you hear an acoustic signal.

 RINSE FILTER / PRESS STEAM

Place a sufficiently large container (approx. 1 litre) under the pivoting nozzle (20) and press coffee key .

 PLEASE WAIT / FILTER RINSING

 COFFEE READY

The water might be slightly discoloured (this is not damag- ing to the health).

8. Drawing off coffee

Switch the machine on by pressing key ON/OFF .

 PLEASE WAIT

 RINSE UNIT

Put an empty cup under the coffee-spout (15) and press rinsing key .

 UNIT RINSING

 COFFEE READY

Put 1, respectively 2 cups under the coffee-spout and press the required key. The pre-brew system (I.P.B.A.S.©) moistens the coffee powder, briefly interrupts the flow and then starts the real brewing process.

You can interrupt the flow of coffee at any time by simply pressing any of the coffee keys.

To obtain a perfect layer of froth adjust the coffee-spout (Fig. 3) to the size of your cups.

10

Page 10
Image 10
Jura Capresso S90 Replacing of filter, Drawing off coffee,  Press KEY / Powder Quantity,  Rinse Filter / Press Steam