Jura Capresso S95, S90 Unit calcified, Cleaning metal contacts, General cleaning instructions

14.7 Unit calcified

 UNIT CALCED

The machine signals when decalcifying becomes necessary.

Under the correct implementation of Claris filter cartridges, decalcifying of the machine becomes unnecessary. For further indications read Chapter 7 “Use of Claris filter cart- ridges“.

14.8 Cleaning metal contacts

 EMPTY TRAY / CLEAN CONTACTS

The remnants of the calcified deposits in the area of the metal contacts must be removed. Proceed as follows:

Rinse fastenings in groove (B) as well as the metal contacts (A) with hot water and some washing-up liquid. Then clean the fastenings in groove (B) as well with a brush (Fig. 8).

14.9 General cleaning instructions

Never use abrasive articles or corrosive chemicals to clean your machine.

Wipe down the casing inside and out using a soft, damp cloth.

Clean the pivoting nozzle after every use.

After warming milk, draw off some hot water to clean the pivoting nozzle inside.

You can take off the Auto-cappuccino for a thorough cleaning.

The water tank should be rinsed and filled with clean water daily.

If you notice any furring in the water tank, this can be de- calcified separately with a customary decalcifying agent. Remove the tank from the machine for this purpose.

If a Claris filter cartridge is used, remove it beforehand.

14.10 Regular servicing

Regular Jura services ensure your machine‘s reliability and longer life. Keep the original packaging to protect the machine while being transported.

14.11 Empty system

This procedure is necessary to prevent your machine from frost damage while being transported.

 Put a container under the pivoting nozzle (20).
 Press selector key and remove water tank
	STEAM INTAKE
	PRESS STEAM / FILL SYSTEM
 Switch off machine by pressing ON/OFF key		.

15. Cleaning	E
The machine has an integrated cleaning program. The procedure

lasts about 15 minutes.

Please use Jura cleaning tablets only. These are available from your Jura dealer.

It is essential not to interrupt the process once it has been started.

Switch on your machine by pressing ON/OFF key

Press key until you can hear an acoustic signal.

 EMPTY TRAY (FILL WATER might show as well)

Put a sufficiently large container under the coffee-spout (15) in order to prevent cleaning liquid from running into the drip tray.

 ADD TABLET (Fig. 9) / PRESS CLEANING

 UNIT CLEANING / PLEASE WAIT

 EMPTY TRAY

17