When you switch on the machine or press any key, the cup illumi- nation is activated for 3 minutes. To switch on the cup illuminati- on, with the machine switched off, press any key.
5. Rinsing the machine
RINSE UNIT
Place an empty cup under the
Press rinsing key 
.
If the machine has been switched off and has already cooled down it will be necessary to carry out this rinsing function when the machine is switched on again.
After switching off the machine, the rinsing sets off automa- tically.
6. Adjusting for water hardness
The water is heated inside the machine. With use, this leads to calcium deposits (furring) forming on the machine. This will be automatically indicated on the display.
For this reason, it is necessary to adjust the machine to the hardness of your local water before you use it for the first time. Use the enclosed
1° water hardness on the German scale represents 1.79° on the French scale.
The machine has got 5 hardness settings to choose from. While adjusting, the chosen grade is shown on the display.
The symbols on the display mean:
HARDNESS |
|
water hardness function is switched off | |
HARDNESS | German water hardness 1 – 7° |
LEVEL 1: | French water hardness 1.79 – 12.53° |
HARDNESS | German water hardness 8 – 15° |
LEVEL 2: | French water hardness 14.32 – 26.85° |
HARDNESS | German water hardness 16 – 23° | |
LEVEL 3: | French water hardness 28.64 | – 41.14° |
HARDNESS | German water hardness 24 – 30° | |
LEVEL 4: | French water hardness 42.96 | – 53.7° |
The machine is adjusted to hardness level 3 before it leaves the factory. You can alter this setting by following the instructions below:
Switch the machine on by pressing ON/OFF key |
| . The |
| |
|
| |||
machine adjusts |
| |||
PLEASE WAIT |
|
|
| |
Open cover (3) and press key P , until you hear an acoustic sig- |
| |||
nal. |
|
|
|
|
PRESS KEY / POWDER QUANTITY |
|
|
| |
Press key | + several times until the following message appears: |
| ||
HARDNESS LEVEL 3 |
|
|
| |
|
| E | ||
By pressing key P you can hear an acoustic signal, |
| the set | ||
hardness level flashes. |
|
| ||
You can alter the hardness level by pressing key - or + . After setting, press key P once again to confirm. An
acoustic signal can be heard.
Press key N to return to
7. Use of Claris filter cartridges
Under proper implementation of Claris filter cartridges, decalcifying of the machine becomes unnecessary. For further information, please read the brochure “Claris. Tough to calcium deposits, gentle to your coffee machine“.
7.1 Placing filter
Pull up cartridge mounting. Pressing lightly, place the filter cart- ridge in the water tank (Fig. 2).
9
