If a mistake occurs while programming one of the above settings, just press key N and the chosen setting moves back to its original standard setting.
14. Care and maintenance
14.1 Fill water
FILL WATER
If this message shows on the display no more coffee can be drawn off. Top up water.
The water tank should be rinsed and filled with fresh water daily. Only use fresh, cold water. Never top up with milk, mineral water or any other liquids. You can top up water without removing tank.
14.2 Empty grounds container
Coffee grounds are collected in the grounds container (23).
EMPTY GROUNDS
If this message shows on the display no more coffee can be drawn off. It is necessary to empty the grounds container.
Remove drip tray carefully as there is water in it.
Do not disconnect the machine from power socket while you empty grounds.
14.3 Empty drip tray
EMPTY TRAY
If this message shows on the display no more coffee can be drawn off. It is necessary to empty the drip tray.
Remove drip tray carefully as there is water in it.
14.4 Fill beans
FILL BEANS
Fill beans as described in chapter 3.3.
The message FILL BEANS will only disappear after drawing off a coffee. We recommend cleaning the bean container from time to time with a dry cloth before you refill beans. Switch off the machine for this purpose.
14.5 Removing foreign objects
Switch off your machine by pressing ON/OFF key .
Remove plug from power socket.
Open bean container (13) and remove the beans. The remaining beans can be removed with a vacuum cleaner.
Loosen both screws in the bean container and then remove container (Fig.5 + 6)
Remove any remaining beans with a vacuum cleaner.
Put the spanner on (Fig.7).
Now turn spanner anticlockwise until the foreign object loosens.
Remove remaining powder with a vacuum cleaner.
Replace bean container and fasten screws.
14.6 Clean machine
CLEAN UNIT
After coffee, etc., has been drawn off 220 times or after 180 rinsing programs have been run, the machine must be cleaned. You can continue to draw off coffee and hot water / steam. However we recommend that you clean the machine (as described in chapter 15) within the next few days.
CLEAN NOW
An acoustic signal indicates the need of an immediate cleaning.
16