12ENSECTIONFORMacintosh(cont.)

Copying Image Data from the Digital Video Camera to the Computer

For details on the basic operation of Mac, refer to the instruction manual provided with your Mac.

Preparation

Start Macintosh.

cInsert the memory card into the camera. Make sure in advance that the memory card contains data which you want to copy onto the Mac.

1 Set the VIDEO/DSC switch to “DSC”.

2 Turn the camera’s POWER switch to “

”.

 

Connect the camera to the computer using

 

3 the provided USB cable. (Z pg. 10)

 

•“USB MODE” appears on the LCD panel.

4 Confirm the “untitled” icon appears on the desktop.

•If the camera is connected to the computer properly, the “untitled” icon appears.

5 Double click the “untitled” icon and copy the desired files from the still image data folder.

NOTES:

cAfter the data has been copied, drop the “untitled” icon in the trash and disconnect the USB cable.

cAlways initialize a Memory Card (a MultiMediaCard or an SD Memory Card) before using it with the digital video camera. (For details on the initialization procedure, refer to the digital video camera’s manual.)

If the camera is connected to a personal computer through the USB interface, there are circum- stances in which it might not be possible to read or write files.

cWhen a file is being accessed from a personal computer, the message “ACCESSING FILE” is displayed on the LCD panel on the camera. Never disconnect the USB cable while this message is displayed.

cDisconnect the USB cable and then turn the computer off or operate the Power dial on the camera.