•The “Add New Hardware Wizard” window will appear.
•“USB MODE” appears on the LCD panel.
4 Load the provided CD-ROM to the CD-ROM drive.
5 Click the “Next” button.
6 Click the “Next” button.
7 Confirm that “CD-ROM drive” has been checked, then click the “Next” button.
•When the loaded CD-ROM is not found, click “Browse” button and select the provided CD-ROM.
8 Click the “Next” button.
9 Click the “Finish” button.
Preparation
Start Windows® 2000.
c If you are running other software, close that software. (Make sure that there are no other application icons open on the task bar.)
1 Set the VIDEO/DSC switch to “DSC”.
2 Turn the camera’s POWER switch to “
3 Connect the camera to the computer using the provided USB cable. (Z pg. 5)
Installing the Software
(For Windows® 2000)
For details on the basic operation of
Windows® 2000, refer to the instruction manual provided with your computer or Windows® 2000.
EN
7
”.