Click the “Finish” button.
Load the provided CD-ROM to the CD-ROM drive.
4
5 Click the “Next” button.
6 Select the “JVCDSCME.INF” in the “ME” folder, and click the “OK” button.
7
•The “Add New Hardware Wizard” window will appear.
•“USB MODE” appears on the LCD panel.
”.
Preparation
Start Windows® Me.
c If you are running other software, close that software. (Make sure that there are no other application icons open on the task bar.)
1 Set the VIDEO/DSC switch to “DSC”.
2 Turn the camera’s POWER switch to “
3 Connect the camera to the computer using the provided USB cable. (Z pg. 5)
Installing the Software (For Windows® Me)
For details on the basic operation of Windows® Me, refer to the instruction manual provided with your computer or Windows® Me.
SECTION FOR Windows® (cont.)
8EN