JVC 120000 (cont.), SECTION FOR Windows

•The “Add New Hardware Wizard” window will appear.

•“USB MODE” appears on the LCD panel.

4 Load the provided CD-ROM to the CD-ROM drive.

5 Click the “Next” button.

6 Click the “Next” button.

7 Confirm that “CD-ROM drive” has been checked, then click the “Next” button.

•When the loaded CD-ROM is not found, click “Browse” button and select the provided CD-ROM.

8 Click the “Next” button.

9 Click the “Finish” button.

”.

Preparation

Start Windows® 98.

c If you are running other software, close that software. (Make sure that there are no other application icons open on the task bar.)

1 Set the VIDEO/DSC switch to “DSC”.

2 Turn the camera’s POWER switch to “

3 Connect the camera to the computer using the provided USB cable. (Z pg. 5)

Installing the Software (For Windows® 98)

For details on the basic operation of Windows® 98, refer to the instruction manual provided with your computer or Windows® 98.

SECTION FOR Windows® (cont.)

6EN