JVC 20981IEN manual Using the Tuner, Tuning In a Station, Presetting Stations, One touch radio

Using the Tuner

4

UP

<

FMAUTO

SLEEP DISPLAY MODE PRESET

TAPE	CD
AUX	FM/AM

CD

REPEATUP

PROGRAMSET

RANDOMDOWN

AHB
PRO	BASS	TREBLE CANCEL

VOLUME

REMOTE CONTROL RM-SUXV10E

STANDBY

			AHB
	AUX		PRO
			VOLUME
	REC		TIMER
FM MODE	REV		CLOCK
	MODE
AUTO PRESET			CD
			OPEN/CLOSE
	TAPE	FM/AM	CD
FM/AM	PHONES
	DOWN	MULTI CONTROL	UP

¢

>

SET

DOWN

FM/AM
¢
4
MONO STEREO	FM mode indicators

Band display, Frequency

display, Preset channel

When the System is in use, the display shows other items as well.

For simplicity, only the items described in this section are shown here.

You can listen to FM and AM (MW/LW) stations. Stations can be		OR
tuned in manually, automatically, or from preset memory storage.	■ Preset Tuning using the Remote Control (Possible
■ Before listening to the radio:	only after presetting stations)
• Make sure that both the FM and AM (MW/LW) antennas	Select the desired preset number using the UP, DOWN, > or <
are correctly connected. (See page 3.)
	button on the Remote Control. After 1 second the display will
One touch radio ––––––––––––––––––––––	show the preset number’s band and frequency.
	Example: Press the UP button until the preset number 12
Just press the FM/AM button to turn on the System and start		“P-12” appears.
playing the station you were last tuned to.	UP	DOWN
■ You can switch from any other sound source to the radio by
		or

pressing the FM/AM button. (After 1 second)

Tuning In a Station

1Press the FM/AM button.

The band and frequency you were last tuned to appear on the display.

(If the last station was selected using the preset number, the preset number appears first.)

Each time you press the button, the band alternates between FM and AM (MW/LW).

	FM/AM		FM/AM
		FM	AM
FM	AM
(On the Unit)		(On the Remote Control)

2Select a station using one of the following methods.

■Manual Tuning

Press the 4 or ¢button repeatedly to move from frequency to frequency until you find the station you want.

OR

■Auto Tuning

If you press and hold the 4or ¢button for one second or more, the frequency changes down, or up, automatically until a station is found.

Presetting Stations

You can preset up to 30 FM stations and up to 15 AM (MW/LW) stations using the Remote Control.

Note: Preset numbers may have been set to factory test frequencies prior to shipment. This is not a malfunction. You can preset the stations you want into memory by following one of the presetting methods below.

Presetting stations manually ––––––––

		UP
	SET	STORED
FM/AM	SET	SET
or		DOWN
		(Within 5 seconds)
When changing the Band	FM = 30, AM = 15

1Select a band by pressing the FM/AM button.

2Press the 4 or ¢ button to tune in a station.

3Press the SET button.

“SET” will flash for 5 seconds.

Within 5 seconds, proceed to the next step.

When the display returns to the one set in Step 2 after 5 seconds, press the SET button again.

8

EN01-09.UX-V100[B]f 8 12/12/00, 12:34 PM