1-38 (No.YA476)
SUB TINT Remote con-
trol unit
[2. V/C]
7. TINT
[Method of adjustment without measuring instrument]
PAL TINT
(1) eceive a PAL broadcast.
(2) Set the PICTURE MODE to BRIGHT.
(3) Select 2. V/C from the SERVICE MODE.
(4) Select <7. TINT>.
(5) Set the initial setting value of <7. TINT>.
(6) If you cannot get the best HUE with the initial setting value,
make fine adjustment until you get the best TINT.
(7) Press the [OK] key to memorize the best values.
NTSC 3.58 TINT
(1) Receive a NTSC 3.58 broadcast.
(2) Follow the same step 2 to 7 as in PAL TINT.
NTSC 4.43 TINT
• When NTSC 3.58 TINT is set, NTSC 4.43 TINT will be
automatically set.
PAL TINT (DVD)
(1) Receive a PAL broadcast.
(2) Set the PICTURE MODE to BRIGHT.
(3) Select 2. V/C from the SERVICE MODE.
(4) Select <10. TINT DVD>.
(5) Set the initial setting value of <10. TINT DVD>.
(6) If you cannot get the best HUE with the initial set-
ting value, make fine adjustment until you get the
best TINT.
(7) Press the [OK] key to memorize the best values.
Signal
generator
Oscilloscope
Remote
control unit
TP-47B
TP-E
[CRT SOCKET
PWB]
[2. V/C]
7. TINT
[Method of adjustment using measuring instrument]
PAL TINT
(1) Receive a PAL colour bar signal (full field colour
bar 75% white).
(2) Connect the oscilloscope to TP-47B and TP-E.
(3) Set the PICTURE MODE to BRIGHT.
(4) Select 2. V/C from the SERVICE MODE.
(5) Select <7. TINT>.
(6) Set the initial setting value of <7. TINT>.
(7) If you cannot get the best HUE with the initial setting value,
make fine adjustment until you get the best TINT.
(8) Press the [OK] key to memorize the best values.
NTSC 3.58 TINT
(1) eceive a NTSC 3.58 colour bar sig nal (full field colour
bar 75% white).
(2) Follow the same step 2 to 8 as in PAL TINT.
NTSC 4.43 TINT
• When NTSC 3.58 TINT is set, NTSC 4.43 TINT will be
automatically set.
PAL TINT (DVD)
(1) Receive a PAL colour bar signal (full field colour
bar 75% white).
(2) Connect the oscilloscope to TP-47B and TP-E.
(3) Set the PICTURE MODE to BRIGHT.
(4) Select 2. V/C from the SERVICE MODE.
(5) Select <10. TINT DVD>.
(6) Set the initial setting value of <10. TINT>.
(7) If you cannot get the best HUE with the initial setting value,
make fine adjustment until you get the best TINT.
(8) Press the [OK] key to memorize the best values.
Item Measuring
instrument Test point Adjustment part Description
AV-21MXP6/V
AV-25MXP6/V
AV-29MXP6/V
WC
YGR
MB
(B)
(-)
(+)
0
+17V (RF)
+15V (RF)
+7V (RF)
+23V
+19V
+29V
VOLTAGE (W-B) Voltage setting
NTSC 3.58(TINT) PAL TINT (DVD)