•Check that the refrigerant lines do not rub or touch lines or other surfaces, and that the fan blade (if applicable) turns freely.
•Check that the compressor is snug on all mounting pads.
•The icemaker can be installed on a dispenser unit or ice storage bin. The ice storage bins listed below are recommended.
Model Number | Bin Width | Recommended Hoshizaki Ice Storage Bin |
30" or Wider | ||
|
| |
|
| |
|
|
For further options, contact your local Hoshizaki distributor.
•NOTICE! Remote model must be connected to an appropriate remote condenser unit. The remote condenser unit listed below is recommended. Connection to a different remote condenser unit will void the warranty unless Hoshizaki approves a different remote condenser unit for your specific application. For further details, contact your local Hoshizaki distributor.
Model Number Recommended Hoshizaki Remote Condenser Unit
C. How to Remove Panels
See Fig. 1
•Front Panel: Remove the screw. Lift up and towards you.
•Top Panel: Lift up at front slightly, push rearward, and lift off.
•Right Side Panel: Remove the screw. Slide forward slightly and lift off.
•Front Insulation Panel: Lift up slightly, and pull towards you.
•Top Insulation Panel: Lift off.
Top Panel
Top Insulation Panel
Front Insulation Panel
Front
Panel
Screw | Screw |
Fig. 1
Right Side Panel
13