JVC C-13110, AV-27115 manual Initial Setup, Auto Tuner Setup, Channel Summary

Initial Setup 13

Auto Tuner Setup

In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the CHANNEL +/- buttons) you will receive only clear, active channels.

Press the MENU button

To AUTO TUNER SETUP

To operate

TUNER MODE : CABLE AIR

START

To choose CABLE or AIR

To move to START

To start Auto Tuner Setup

NOW

PROGRAMMING !

48

Programming will take approximately 1 to 2

minutes.

PROGRAMMING OVER!

Channel Summary

Channel Summary allows you to customize the line-up of channels received by your TV. You can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels.

Press the MENU button

To CHANNEL SUMMARY

To operate

The Channel Summary screen (below) will now be displayed with the channels set to scan marked with an "X". You can delete channels from the scan by removing the "X". If any channels were missed during Auto Tuner Setup and you wish to add them, you may by placing an "X" next to the channel number.

CH	ADD		:	CH	ADD
01	–	–	:	06	X	–
02	X	–	:	07	–	–
03	X	–	:	08	–	–
04	X	–	:	09	X	–
05	X	–	:	10	X	–

To the ADD column

To include or delete from scan

Exit when finished

•Noise Muting will not work during Auto Tuner Setup.

NOTES:

Some cable systems experience interference from radio frequencies on cable Channel 95. You may delete this channel from

your scan by removing the "X" next to it on the Channel Summary screen.