JVC AV-27115, C-13110 manual Cable and VCR Connections

6 Connections

Cable and VCR Connections

There are two basic types of antenna or cable connections:

•If you have an antenna or have a cable system that does not require you use a cable box to select channels, please refer to Diagram #1.

•If you use a cable box to access any or all the channels, please refer to Diagram #2.

1)Connect the antenna or cable TV wire from the wall outlet, in to the RF Input on your VCR.

2)Connect an RF cable from the VCR Output, in to the RF input on the back of the TV.

• If you want to use the VCR as a separate tuner (not be required to have the VCR set to channel 3 or 4 to watch the TV), you can connect a two-way splitter in between the Cable and VCR connections.

1Illustration of AV-27120

1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input on your Cable Box.

2) Connect an RF cable from the Cable Box Output, in to the VCR’s RF input.

3) Connect an RF cable out from the VCR’s output in to RF input at the back of the TV.

2Illustration of AV-27120

Notes

• Refer to the Cable Box or VCR’s instructions for more information on its operation.

Headphone Connection (available on 13 and 20 inch models)

You can connect a pair of headphones or earphone to the television using the headphone jack on the front panel.

1) Plug a headphone/earphone jack into the headphone jack on the television’s front panel.

S-Video Connection (available on model AV-27120 only)

You may also choose to connect video devices (VCR, Camcorders, etc) by using an S-Video Cable. S-Video may be substituted in any of the connections diagrams included here. To use S-Video:

1)Plug an S-Video cable out from the video device and in to the TV’s S-Video Input. Keep the audio connections the same as shown in the diagrams.