![](/images/new-backgrounds/1233272/23327233x1.webp)
P L U G I N M E N U 17
PLUG IN MENU
The Plug In Menu comes up automatically when you first turn on the TV after plugging it in. The Plug In Menu sets the default preferences for you for:
❒The Language in which you want the onscreen displays to appear.
❒The Auto Tuner Setup of channels to be included in scan.
❒GUIDE Plus+ GOLD settings so you may begin to receive programming information.
LANGUAGE
Your JVC television allows you to choose from English, French, or Spanish on- screen menus and displays.
To LANGUAGE
LANGUAGE ENG FRE SPA
To choose the language
ENGLISH
FRENCH
SPANISH
AUTO TUNER SETUP
During Auto Tuner Setup, the TV will automatically scan through all available channels and memorize the active ones so that when you scan, you do not pick up weak or noisy channels.
To AUTO TUNER SETUP
To operate
TUNER MODE : CABLE AIR
START
To choose CABLE or AIR
To move to START
To start programming
NOW
PROGRAMMING!
48
Programming takes approximately
1 to 2 minutes
PROGRAMMING OVER!
NOTES:
We recommend that you do not exit the Plug In Menu before completing the setup so that your preferences are set right away.
If you do exit, don’t panic, you can set these preferences later with the regular menu.
Note: Language settings apply only to the television's
GUIDE PLUS+ SETUP
You must perform Guide Plus+ Setup before you can begin using the GUIDE Plus+ GOLD features.
To GUIDE PLUS+ SETUP
To operate
You should now turn to the section "Guide Plus+ Gold Setup", page 18 in this book, and complete the Setup steps outlined there.
Note: Noise Muting will not work while Auto Tuner Setup is working.
FINISH
Once you have set up the items in the Plug In Menu you must select finish.
To FINISH
To Exit
Note: You can reset the preferences that you set here in the Plug In Menu via the regular JVC Menu system.