JVC AV-29V514/B PAL Side PIN, Ntsc Side PIN, PAL Trapezium, Ntsc Trapezium, Linearity

Item	Measuring		Test point		Adjustment part		Description
	instrument
SIDE PIN	Signal			[4. DEF]		- PAL SIDE PIN -
adjustment	generator			7. EW-PIN		(1) Receive a PAL crosshatch signal.
						(2)	Select 7. EW-PIN.
	Remote					(3)	Set the initial setting value of 7. EW-PIN.
	control unit					(4)	Adjust 7. EW-PINso that the first vertical lines at the
							left and right edges on the screen are straight.
		Straight
						- NTSC SIDE PIN -
						(1)	Receive a NTSC crosshatch signal.
						(2)	Make similar adjustment of NTSC SIDE PIN in the
							same way as for "PAL SIDE PIN".

TRAPEZIUM	Signal		[4.DEF]	- PAL TRAPEZIUM -
adjustment	generator		6. TRAPEZ	(1) Receive a PAL crosshatch signal.
				(2)	Select 6. TRAPEZ.
	Remote			(3)	Set the initial setting value of 6. TRAPEZ.
	control unit			(4)	Adjust 6. TRAPEZ so that the vertical lines at the left
					and right edges on the screen are in parallel.
		Parallel
				- NTSC TRAPEZIUM -
				(1)	Receive a NTSC crosshatch signal.
				(2)	Make similar adjustment of NTSC TRAPEZIUM in
					the same way as for "PAL TRAPEZIUM".

V.LINEARITY	Signal	[4. DEF]		- PAL V. LINEARITY -
adjustment	generator	12. V-S. CR		(1)	Receive a PAL crosshatch signal.
		13. V-LIN		(2)	Select 12. V-S.CR.
	Remote			(3)	Set the initial setting value of 12. V-S. CR.
	control unit			(4)	Select 13. V-LIN.
				(5)	Set the initial setting value of 13. V-LIN.
			TOP	(6)	Adjust 12. V-S. CR and 13. V-LINso that the spaces
					of each line on TOP, CENTRE and BOTTOM
					become uniform.
				- NTSC V. LINEARITY -
			CENTRE	(1)	Receive a NTSC crosshatch signal.
				(2)	Make similar adjustment of NTSC V-S. CR in the
			BOTTOM		same way as for "PAL V-S. CR".

1-24 (No.YA139)