JVC AV-29V514/B PAL Corner PIN, Ntsc Corner PIN, PAL H. Parallel, Ntsc H. Parallel, Bow

Item	Measuring		Test point		Adjustment part		Description
	instrument
CORNER PIN	Signal			[4. DEF]		- PAL CORNER PIN -
adjustment	generator			8. COR-UP		(1)	Receive a PAL crosshatch signal.
				9. COR-LO		(2)	Select 8. COR-UP.
	Remote					(3)	Set the initial setting value of 8. COR-UP.
	control unit					(4)	Select 9. COR-LO.
						(5)	Set the initial setting value of 9. COR-LO.
		Straigt				(6)	Adjust 8. COR-UPand 9. COR-LOso that the
							vertical lines at the four corners on the screen are
							straight.
						- NTSC CORNER PIN -
						(1)	Receive a NTSC crosshatch signal.
						(2)	Make similar adjustment of NTSC CORNER in the
							same way as for "PAL CORNER".

H. PARALLEL	Signal		[4.DEF]	- PAL H. PARALLEL -
adjustment	generator		10. ANGLE	(1) Receive a PAL crosshatch signal.
				(2)	Select 10. ANGLE.
	Remote			(3)	Set the initial setting value of 10. ANGLE.
	control unit			(4)	Adjust 10. ANGLE to optimize the trapezium
					distortion at the centre of the screen.
		Parallel
				- NTSC H. PARALLEL -
				(1)	Receive a NTSC crosshatch signal.
				(2)	Make similar adjustment of NTSC H. PARALLEL in
					the same way as for "PAL H. PARALLEL".

H. BOW	Signal		[4.DEF]	- PAL H. BOW -
adjustment	generator		11. BOW	(1) Receive a PAL crosshatch signal.
				(2)	Select 11. BOW.
	Remote			(3)	Set the initial setting value of 11. BOW.
	control unit			(4)	Adjust 11. BOW to optimize the horizontal arc
					distortion.
		Straight
				- NTSC H. BOW -
				(1)	Receive a NTSC crosshatch signal.
				(2)	Make similar adjustment of NTSC H. BOW in the
					same way as for "PAL H. BOW".
				(3)	Press the [DISPLAY] key twice to return to the
					normal screen.

(No.YA139)1-25