Troubleshooting
•Have the COLOUR and BRIGHT settings been adjusted properly? Follow the description “BRIGHT” and “COLOUR” on page 22 to try to adjust them properly.
•Videotaping teletext is not recommended because it may not record correctly.
•When a white and bright still image (such as a white dress) is displayed on the screen, the white part may look as if it were coloured. This is unavoidable due to the nature of the picture tube itself, and is not a fault. When the picture disappears from the screen, the unnatural colours will also disappear.
•When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal, and is not a TV fault.
Poor sound
•Have you adjusted BASS or TREBLE properly? If not, follow the description
“BASS” or “TREBLE” on page 25.
When the TV channel reception is poor, it can be hard to hear the stereo or bilingual sound. In this case, follow the description “STEREO / I • II” on page 25 to hear the sound more easily by changing it to a mono sound.
Operation disabled
•Have the batteries of the remote control become exhausted? Follow the description “Putting the batteries into the remote control” on page 7 and replace them with new batteries to try to solve the problem.
•Have you tried to use the remote control from the sides or rear of the TV or from more than seven metres away? Use the remote control in front of your TV and less than seven metres away to try to solve the problem.
•When you are viewing a teletext programme, you cannot operate the menus. Press the bbutton to return to the ordinary TV programme and then try operating the menus.
•If the TV operation becomes disabled suddenly, press the Main power button on the TV and turn off the main power. Try to press the Main power button again to turn on the main power. If the TV returns to a normal state, it is not a failure.
Other concerns
•When the SLEEP TIMER function operates, the TV is automatically turned off. If the TV is turned off suddenly, try to press the #(Standby) button to turn on the TV once again. At this time, if the TV resumes a normal state, there is no problem.
•When a WSS (wide screen) signal is included in the broadcast signal or the signal from an external device, or when the TV is receiving a control signal from an external device, the ZOOM mode will change automatically. When you want to return to the previous ZOOM mode, press the cbutton to choose the ZOOM mode again.
41