Downloading the data to VCR
You can transmit the latest Programme numbers (PR) data to the VCR with the T-V LINK function.
Caution
•This only works when the T-V LINK compatible VCR is connected to the EXT-2 terminal.
•This only works when the T-V LINK menu is displayed.
T-V LINK
DOWNLOAD TV RECORDING DEVICE
TV OK
EXIT
D0005-EN
1Turn on the VCR
2Press the abutton
The data transmission begins.
DOWNLOAD TV RECORDING DEVICE
TRANSFER. . . . .
D0037-EN
The T-V LINK menu disappears once the data transmission ends.
When the T-V LINK menu is changed over to another menu: The menu operation at the TV side is completed and it is shifted to the menu operation at the VCR side. Refer to the VCR Instruction Manual and operate the VCR.
If “FEATURE NOT AVAILABLE” appears at the T-V LINK menu, ensure the following three items are correct; then press the abutton to retry data transmission.
•Has the T-V LINK compatible VCR been connected to the EXT-2 terminal?
•Has the VCR power been turned on?
•Does the SCART cable that connects the EXT-2 terminal to the T-V LINK compatible VCR have all its proper connections?
T-V LINK FUNCTIONS
When a T-V LINK compatible VCR is connected to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features:
To use T-V LINK functions:
A T-V LINK compatible VCR is necessary. The VCR must be connected to the EXT-2 terminal on the TV by a fully wired SCART cable.
A “T-V LINK compatible VCR” means a JVC VCR with the T-V LINK logo or a VCR with one of the following logos. However, these VCRs may support some or all of the features described below. For details, refer to your VCR instruction manual.
“Q-LINK” (a trademark of Panasonic Corporation)
“Data Logic” (a trademark of Metz Corporation)
“Easy Link” (a trademark of Phillips Corporation)
“Megalogic” (a trademark of Grundig Corporation)
“SMARTLINK” (a trademark of Sony Corporation)
Pre-set Download
Download the registered data on the TV channels from the TV to the VCR.
The Preset Download function automatically begins when the initial setting is complete or whenever the AUTO PROGRAM or EDIT/ MANUAL operations are performed.
• This function can be operated via VCR operation.