SET UP menu

PICTURE TILT

There are cases where the Earth’s magnetic force may make the picture tilt. If this happens, you can correct the picture tilt.

1Press the 6 buttons to choose PICTURE TILT. Then press the a button

PICTURE TILT

TV OK

D0018-EN

2Press the 6 buttons until the

picture becomes level. Then press the abutton

DECODER (EXT-2)

When connecting a Decoder with a T-V LINK compatible VCR connected to the EXT-2 terminal, use the DECODER (EXT-

2)function to unscramble the scrambled TV channels.

1Turn on the Decoder power

2Display the TV channel capable of being unscrambled with the Decoder on the TV

Even if the Decoder is functioning, a scrambled picture appears at this time.

3Press the abutton to display the SET UP menu

The SET UP menu appears.

SET UP

AUTO PROGRAM

EDIT/MANUAL

LANGUAGE

PICTURE TILT

DECODER(EXT-2) OFF

EXT SETTING

TV OK

D0029-EN

4Press the 6 buttons to choose DECODER (EXT-2). Then press the 5 buttons to choose ON

An unscrambled picture appears.

To cancel the DECODER (EXT-2) function:

Press the 5buttons to choose OFF.

5Press the abutton to complete the setting

The T-V LINK menu appears.

T-V LINK

DOWNLOAD TV RECORDING DEVICE

TV OK

EXIT

D0005-EN

6Follow the operating procedure “Downloading the data to VCR” on page 10 to transmit the Programme number (PR) data to the VCR

7If you have another TV channel capable of being unscrambled with a Decoder, repeat steps 2 through 7

If for some reason the DECODER (EXT- 2) function has been set to “ON” but the TV channel cannot be unscrambled, check the following:

• Has the Decoder been connected to the VCR properly according to the VCR and Decoder Instruction Manuals?

• Has the Decoder power been turned on?

• Can the TV channel be unscrambled with a Decoder?

• Is it necessary to change the VCR settings in order to connect the Decoder? Confirm that the VCR is set properly by rechecking the VCR Instruction Manual.

33