Troubleshooting
Problem | Possible Cause | Possible Solution |
|
• Unit will not start. | • Battery pack not installed properly. | • Check battery pack installation. | |
• Battery pack will not charge. | • Battery pack not charged. | • Check battery pack charging requirements. | |
• Battery pack not inserted into charger. | • Insert battery pack into charger until green | ||
| • Charger not plugged in. | LED appears. | |
| • Plug charger into a working outlet. Refer to | ||
| • Surrounding air temperature | “Important Charging Notes” for more details. | |
| • Move charger and battery pack to a | ||
| too hot or too cold. | surrounding air temperature of above 40 | |
|
| degrees F (4,5°C) or below 105 degrees F | |
• Unit shuts off abruptly. | • Battery pack has reached its | (+40,5°C). | |
• Allow battery pack to cool down. | |||
| maximum thermal limit. | • Place on charger and allow to charge. | |
| • Out of charge. | ||
| ( To maximize the life of the battery pack it is designed |
|
|
| to shutoff abruptly when the charge is depleted.) |
|
|
For assistance, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at
15
