Black & Decker LLP120 instruction manual Components

Components

Functional Description		5.	Latch
(Fig A)
1.	Top jaw	6.	Battery Pack
2.	Lower jaw	7.	On/off switch actuators
3.	Chain guide bar	8.	Chipping ejection point
4.	Oiling cover	9.	Charger

A

These products use the batteries and chargers listed in the chart below.

Description		Catalog #
20v	Max* Lithium-Ion Battery:	LBXR20
20v	Max* Type 1 22wh Lithium-Ion Battery:	LB20
20v	Max* Lithium-Ion Battery Charger:	LCS20
Lithium 2 Amp Fast Charger:		L2AFC
Lithium 2 Amp Fast Charger:		L2AFCBST
20v	Max* Lithium-Ion Battery Charger:	LCS1620

material. Foreign materials of a conductive nature such as, but not
limited to, steel wool, aluminum foil, or any buildup of metallic
particles should be kept away from charger cavities. Always unplug
the charger from the power supply when there is no battery pack in
the cavity. Unplug charger before attempting to clean.
•	The charger supplied with this product is intended to be
	plugged in such that it is correctly orientated in a vertical or
•	floor mount position.
	DO NOT attempt to charge the battery pack with any chargers
	other than the ones in this manual. The charger and battery
•	pack are specifically designed to work together.
	These chargers are not intended for any uses other than
	charging designated Black & Decker rechargeable batteries.
•	Any other uses may result in risk of fire, electric shock or electrocution.
	Do not expose charger to rain or snow.
•	Pull by plug rather than cord when disconnecting charger.
•	This will reduce risk of damage to electric plug and cord.
	Make sure that cord is located so that it will not be stepped
•	on, tripped over, or otherwise subjected to damage or stress.
	Do not use an extension cord unless it is absolutely
	necessary. Use of improper extension cord could result in risk of
•	fire, electric shock, or electrocution.
	An extension cord must have adequate wire size (AWG
	or American Wire Gauge) for safety. The smaller the gauge
	number of the wire, the greater the capacity of the cable, that is 16
	gauge has more capacity than 18 gauge. When using more than
	one extension to make up the total length, be sure each individual
	extension contains at least the minimum wire size.
	Recommended Minimum Wire Size for Extension Cords
		Volts		Minimum Gauge for Cord Sets
				0-25	Total Length of Cord in Feet
		120V			26-50	51-100	101-150
				(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
		Ampere Rating			American Wire Gauge
		More	Not more
		Than	Than	18	16	14	12
	6 -		10

7