Extreme Networks 12800 Series manual Securing the BlackDiamond 12804 AC Power Cord Retainer

Using the BlackDiamond12804 AC Power Cord Retainer Channel

Figure 49: Securing the BlackDiamond 12804 AC Power Cord Retainer

Install and secure the channel bracket to the switch by tightening both captive screws

Captive screw

Captive screw

EX_139

5Starting from the left, lay the first four power cords into the channel (see Figure 50).

6Lay the last two power cords on top of the bottom four cords (see Figure 50).

Figure 50: Routing the Power Cords in the Channel

From the left, lay first four

power cords into channel bracket

Lay last two power cords onto others

NOTE

Leave the ESD-preventive wrist strap permanently connected to the switch, so that the strap is always available when you need to handle ESD-sensitive components.

BlackDiamond 12800 Series Switches Hardware Installation Guide 87