Extreme Networks 12800 Series manual Rack-Mounting the BlackDiamond 12804 Chassis

Installing the BlackDiamond 12800 Series Chassis

6At each side of the chassis, place one hand in the empty power supply bay and the other hand in the recessed hand-hold on the back panel of the BlackDiamond 12804 chassis. Carefully lift the chassis off the foam cushion and onto the floor (see Figure 29).

Figure 29: Correct Method for Lifting the BlackDiamond 12804 Chassis

EX_112

CAUTION

Do not use the fan tray handle to lift or maneuver the BlackDiamond 12804 chassis. This handle is not designed to support the weight of the chassis.

Verify that the following items are included in the crate:

●BlackDiamond 12804 chassis with four installed blank front panels

●Power cord retaining bracket

●19-inch helper bracket (installation tray)

●BlackDiamond documentation pack with ESD-preventive wrist strap

NOTE

Save all packaging, clip locks, and box pieces for future use in the event that the BlackDiamond 12804 chassis must be moved to another location or returned to Extreme Networks, Inc.

Rack-Mounting the BlackDiamond 12804 Chassis

The BlackDiamond 12804 chassis has attached rack-mounting flanges for a front-mount rack installation. To install the chassis in a mid-mount position, attach optional mid-mount brackets, as described in “Attaching the BlackDiamond 12804 Mid-Mount Brackets” on page 61.

60 BlackDiamond 12800 Series Switches Hardware Installation Guide