Extreme Networks 12800 Series manual XM-2X and XM-2XR LEDs, XM-2X I/O Module

BlackDiamond 12800 Series I/O Modules

Figure 11: XM-2X I/O Module

Module status	10 Gbs ports
LEDs

EX_155h

Figure 12: XM-2XR I/O module

Module status	10 Gbs ports
LEDs

EX_156h

NOTE

Although the XM-2X module and the XM-2XR module are similar in appearance, the functionality of each I/O module varies. The XM-2XR module is part of the R series and includes the rate limiting feature; the XM-2X module does not support rate limiting.

To use rate limiting, you must install the MSM-5R plus the GM-20XTR I/O module and/or the XM-2XR I/O module.

The XM-2X module and XM-2XR module have two unpopulated XENPAK-based 10 Gigabit Ethernet ports.

The default configuration of the XM-2X and XM-2XR I/O modules is as follows. All ports:

●Are added to the default VLAN as untagged.

●Inherit the properties of the default VLAN (for example, protocol type and VLANid).

XM-2X and XM-2XR LEDs

The XM-2X module and XM-2XR module have the following LEDs:

●Module status

●Module diagnostics

●Port status

BlackDiamond 12800 Series Switches Hardware Installation Guide 27