Installing the BlackDiamond 12800 Series Chassis
Initial Management Access
After your switch has completed all power on
NOTE
In BlackDiamond switches, the management port on the MSM is part of the management VLAN by default. Refer to “Management Ports” on page 16 for further details.
Connecting Equipment to the Console Port
Connection to the console port is used for temporary direct local management. This connection is not intended to be left in place for normal
The console port settings are:
●Baud
●Data
●Stop
●
●Flow
The terminal or PC with
Appropriate shielded serial cables are available from your local supplier, or you can make your own. To ensure the electromagnetic compatibility of the unit, use only shielded serial cables that are grounded on both ends. For information about the
Logging In for the First Time
After your switch has completed all power on
NOTE
In BlackDiamond switches, the management port on the MSM is part of the management VLAN by default. Refer to “Management Ports” on page 16 for further details.
To manually configure the IP settings:
1Connect a terminal or PC with
2At your terminal, press [Return] one or more times until you see the login prompt.
70 | BlackDiamond 12800 Series Switches Hardware Installation Guide |
|
|