
Maintenance Safety
Maintenance Safety
When you perform maintenance procedures on Extreme Networks equipment, follow these recommendations:
●Use only original accessories or components approved for use with this system. Failure to follow these instructions may damage the equipment or violate required safety and EMC regulations.
●The chassis cover should only be removed by Extreme Networks personnel. There are no customer serviceable components in this system. Repairs to the system must be performed by an Extreme Networks factory service technician.
●In systems that have
●Disconnect all power before removing the back panel of any Extreme Networks switch, unless otherwise instructed by a
●Disconnect all power cords before working near power supplies, unless otherwise instructed by a maintenance procedure.
●When handling modules, optic devices, power supplies, or other modular accessories put on the
●Install all cables in a manner that avoids strain. Use tie wraps or other strain relief devices.
●Replace a power cord immediately if it shows any signs of damage.
General Safety Precautions
Follow these guidelines:
●Do not try to lift objects that you think are too heavy for you.
●When you install equipment in a rack, load heavier devices in the lower half of the rack first to avoid making the rack
●Only use tools and equipment that are in perfect condition. Do not use equipment with visible damage.
●Routing cables: Route cables in a manner that prevents possible damage to the cables and avoids causing accidents, such as tripping.
BlackDiamond 12800 Series Switches Hardware Installation Guide | 135 |
|
|