CAUTION 
4.DO NOT ROTATE THE REEL BY GRASPING THE BLADES WITH YOUR BARE HAND. THIS COULD RESULT IN SERIOUS INJURY TO YOUR FINGERS OR HAND.
5.Be sure to check the clearance of the reel and/or bedkinfe before beginning the grinding operation. Too much
6.Insure that the new grinding wheel is “dressed” and balanced correctly after replacing an old one.
Maintenance
1.Keep the canopy shielding in place and in good condition. Do not operate the grinder with the shields missing.
2.Periodically check for loose hardware and tighten if necessary.
3.Keep in mind that this is an abrasive machine; oil all points of lubrication daily and keep all working surfaces clean.
4.Thick grease should not be used on the wheel head guide rails.
Safety Decals
Your Reel and Bedknife Sharpener comes equipped with all safety decals in place. They were designed to help you safely operate your sharpener. Read and follow their directions.
1.Keep safety decals clean and legible.
2.Replace all damaged or missing safety decals. To order new safety decals go to your dealer and refer to the parts section for the safety decal package part number.
3.Refer to this section for proper decal placement. To in stall new safety decals:
1.Clean the area where the decal is to be placed. Spray this area with soapy water.
2.Peel backing from the decal. Press firmly on sur- face being careful not to cause air bubbles under the decal.
3.With a squeegee, work out any air bubbles that remain under the decal.
Personal Safety Equipment
Locke Turf advises all users of Reel and Bedknife Sharpeners to use the following personal safety equip- ment. Always follow the operating instructions; your safety and the effective use of the product depends upon your actions.
Kevlar Meat Cutter Gloves
Respirator
Goggles or Full Face Shield
Hearing Protection
6
