Locke RS-5100 manual Maintenance & Lubrication, Clean-Up, Refer to -2 and

SECTION 4—MAINTENANCE & LUBRICATION

Clean-Up

1.After use, wash the unit with its own water supply which should have an anti-rust additive. The res- ervoir holds approximately three gallons of clear water and recommended amounts of anti-rust ad- ditive.

2.Keep the wheel head carriage assembly clean. Figure 4-1

Refer to Figure 4-2 and 4-3:

Using a chain and cable lubricant, occasionally oil the chain with a light coating. Chain and cable lube in a spray can is very effective. Use 30 wt oil on guide rails and work table rails. Use 90 wt oil on grease fittings and carriages.

NOTE

The long life of this machine is based on the quality of maintenance and continued use of anti-rust additive in the coolant.

24