Locke RS-5100 manual Introduction, Getting Acquainted With Your Reel and Bedknife Sharpener

Introduction

Safety First!

Locke Turf employees are fully aware of the need for safe operating procedures around all of our equipment. We hope that you will make a sincere effort to put safety above all other priorities. The Reel and Bed- knife Sharpener requires an extra special

Measure of safety awareness. Please read and heed all of the safety alert information about your sharp- ener. As the operator of this place of equipment, you are in complete control. Only you can prevent an accident from happening.

Getting Acquainted With Your Reel and Bedknife Sharpener

There are some features that have been incorporated into this unit that may not be found on other sharpen- ers. Take a moment to note some of the les obvious advantages of your new sharpener.

•Precision manufactured mounting brackets and the adjustable spin motor mounting decreases “set-up” time and insures ease of reel unit mounting and accuracy during the sharpening process.

•The one (1) horsepower wheel head motor pro- duces faster sharpening time, with less adjust- ment to obtain the best possible cutting results.

•The Locke Turf Sharpeners allow a full range of adaptability.

•All primary points are easily accessible for main- tenance.

•The pump supply line is equipped with a shut-off valve to regulate coolant flow.

•The three (3) gallon reservoir maintains more than adequate coolant flow to provide less heat build-up during the sharpening process.

•The wheel heads are positioned to provide better operator visibility.

Owner Assistance

The parts on your Locke Turf Reel and Bedknife Sharpener have been specially designed and should only be replaced with genuine Locke Turf parts. Should you require parts or service, contact your Locke Turf dealer. He has trained personnel, parts and the equipment to carry out all of your service requirements.

Serial Number

The serial number plate is located on the outside right frame, near the lower left corner. For your conven- ience, record the serial number and purchase date on this page. This serial number and purchase date on this page. This number provides important information about your sharpener and may be required to obtain the correct replacement part. Always use the serial number and model number when corresponding or ordering parts from your Locke Turf dealer.

Your dealer wants you to be satisfied with your new machine. If for any reason you are not satisified with the service received, the following actions are sug- gested:

1.First, discuss the matter with your dealership ser- vice manager. Make sure they are aware of any problems you may have and that they have had the opportunity to assist you.

2.If you still not satisfied, seek out the owner or General Manager of the dealership and explain the problem and request assistance.

3.For further assistance beyond that provided by your dealer, you may contact:

Locke Turf—Customer Service

307 Highway 52E

Opp, AL 36467

Serial Number

Model Number

Date Purchased

Store a copy of the above information in a separate location in case this manual is lost.

4