Spin Grinding
NOTE
When discussing spin grinding, any reference to the carriage or its associated parts means the reel carriage, located to the right as viewed for the operator’s side.
1.Open front canopy and adjust wheel head away form work table bars by turning infeed screw hand wheel counter clockwise, bringing wheel head towards operator. Figure
Infeed Screw Hand Wheel
Figure
Refer to Figure 3-2 and 3-3:
2.Slide limit stops to each end of the stop rail.
Right Limit Stop
Figure
3.Close the front canopy and open the rear canopy.
4.Securely attach the mounting brackets to the reel unit.
5.Place the reel unit into the grinder making sure the mounting brackets are fitted properly and sitting firmly on the work table bars. Leave the mounting bracket bases loose in the work table bars. Figure
Left Limit Stop
Figure
13