Extreme Networks manual Power Supplies for the BlackDiamond 12800 Series Switches

Power Supplies for the BlackDiamond 12800 Series Switches

Table 25: BlackDiamond 12802 Switch Technical Specifications (Continued)

Operating conditions	Operating temperature range 0° C to 40° C (32° F to 104° F)
	Operating humidity:10% to 93% relative humidity, non-condensing
	Operating altitude 0 to 3000 meters (0 to 9,850 ft)
	Operational shock: 30 m/s2 (3 g), 11 ms, 60 shocks
	Operational random vibration: 5 to 500 Hz @ 1.5g rms
Storage & transportation	Transportation temperature: –40° C to 70° C (–40° F to 158° F)
conditions (packaged)	Storage and transportation humidity: 10% to 93% relative humidity,
	non-condensing
	Packaged shock (half sine):
	<50 kg 180 m/s2 (10 g), 6 ms, 600 shocks, modules
	>50 kg 100 m/s2 (6 g), 11 ms, 600 shocks, chassis
	Packaged random vibration: 5 to 20 Hz @ 1.0 ASD w/–3dB/oct. from 20 to
	200 Hz
	Packaged sinusoidal vibration: 5 to 62 Hz, 5 mm/s velocity, 62 to 200 Hz,
	0.2 G
	Tilt: 22.5 degrees and return to position
	14 drops minimum on sides & corners
	@ 39.4" <20 lb (9 kg) modules
	@ 19.7" <80 lb (36 kg) chassis

Power Supplies for the BlackDiamond 12800 Series Switches

This section lists specifications for the power supplies that are installed in the following BlackDiamond switches:

●BlackDiamond 12804 switch

●BlackDiamond 12802 switch

Table 26: AC SSI PS Model #60020/PS2336 (700/1200 W AC PSU)

For the BlackDiamond 12804 switch
Typical configuration	3 power supplies
Full configuration	6 power supplies
Input	Nominal input: 100 to 240 V , 60/50 Hz, 10 A max
	AC voltage input range: 90 to 264 V
	Maximum input amperages:
	7 A @ 200 V	(high-line)
	10 A @ 90 V	(low-line)
	AC line frequency: 47 to 63 Hz
	PS input socket: IEC 320 C14
	Minimum wire size: 16 AWG (1.31mm2) copper stranded
Output	DC output: 48 V	, 24 A/12 V	, 4 A (high-line)

48V , 13.5 A/12 V , 4 A (low-line)

DC output power (W): 700 to 1200 W

Power supply cord selection	Refer to “Selecting Power Supply Cords” on page 136.
AC power supply input socket	IEC 320 C14
Minimum wire size	16 AWG (1.0mm2) copper stranded
	(pre-approved cord set for county of use)
Operating conditions	Operating temperature: 0° C to 40° C
	Storage temperature: –40° C to 70° C
	Operating humidity: 10% to 90% relative humidity, non-condensing
	Operational shock: 30 m/s2 (3 g)

BlackDiamond 12800 Series Switches Hardware Installation Guide 151