Extreme Networks 12800 Series manual Connector Pinouts, DC PS Model #65022 325 W DC PSU

Connector Pinouts

Table 29: DC PS Model #65022 (325 W DC PSU)

For the BlackDiamond 12802 switch
Minimum configuration	2 power supplies
Full configuration	4 power supplies
Input	Nominal input voltage: –48 V , –60 V , 15 A maximum
	Operational voltage range: –40 V to –72 V
	Maximum input amperages:
	10 A @ –40 V	(low-line)
	8 A @ –48 V
	7 A @ –60 V	(high-line)
	Maximum in-rush current: 8 A
	Input circuit protection: 15 A

Wire harness provided by Extreme Networks with each power supply. Extreme part number 4340-00028

Minimum wire size: 14 AWG (1.3 mm2) copper stranded (pre-approved cord set for county of use)

Connector: Molex connector PN 42816-0312

Connector pins: Molex connector pins PN 42815-0032

Output	DC Output:
	48 V	, 6 A/ 12	V
	2.5 A/7 VSB 0.75		A
	Output power (W): 325 W
Operating conditions	Operating temperature: 0° C to 40° C
	Storage temperature: –40° C to 70° C

Operating humidity: 10% to 90% relative humidity, non-condensing

Operational shock: 30 m/s2 (3 g)

Connector Pinouts

Table 30 describes the pinouts for a DB-9 console plug connector.

Table 30: Pinouts for the DB-9 Console Connector

Function	Pin Number	Direction
DCD (data carrier detect)	1	In
RXD (receive data)	2	In
TXD (transmit data)	3	Out
DTR (data terminal ready)	4	Out
GND (ground)	5	-
DSR (data set ready)	6	In
RTS (request to send)	7	Out
CTS (clear to send)	8	In

Figure 87 shows the pinouts for a 9-pin to 25-pin (RS-232) null-modem cable.

BlackDiamond 12800 Series Switches Hardware Installation Guide 153