Backup

With other products

2

Dubbing images onto

 

other video device

Images played back on this unit can be dubbed onto a DVD recorder or video device.

Use the AC adaptor to free you from worrying about the battery running down.

VIDEO IN

AAV cable (supplied)

Insert the plugs as far as they will go.

Do not use any other AV cables except the supplied one.

Select the video input on the video device and TV that this unit and the video device are connected to.

AUDIO IN

1 Connect this unit to a video device and then change the mode to .

2 Start playback on this unit.

3 Start recording on the connected device.

To stop recording (dubbing), stop playback on this unit after stopping recording on the recorder.

If the date and time display and function indication are not wanted, cancel them before dubbing. (l 28, 76)

If the dubbed images are played back on

awide-screen TV, the images may be stretched vertically.

In this case, refer to the operating instruction of the device you are connecting to or read the operating instructions of the wide-screen TV and set the aspect ratio to 16:9.

Using SD card slot or USB

terminal of other video devices

If you have a DVD recorder with an SD card slot or a USB terminal, images recorded by this unit can be copied (dubbed) onto the hard disk or a DVD disc.

Refer to the operating instructions of your DVD recorder for information about whether or not it supports copying (dubbing) from an SD card or a USB terminal.

When using a USB terminal

Connect this unit to a DVD recorder with the USB cable (supplied), then select [PC/ RECORDER] on the USB function selection screen.

83

VQT2L35

Page 83
Image 83
Philips SDR-S50 Dubbing images onto, Other video device, Using SD card slot or USB Terminal of other video devices