Problem

Any scenes/still pictures cannot play back.

Although this unit is correctly connected to a TV, images cannot be seen.

The images are squeezed horizontally.

Scenes cannot be deleted.

If the SD card is inserted in this unit, it is not recognised.

If the SD card is inserted in another device, it is not recognised.

“ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.” is displayed.

Check points

Any scenes/still pictures where the thumbnails are

displayed as cannot be played back.

Please read the operating instructions of your TV and select the channel that matches the input used for the connection.

Change the [TV ASPECT] setting to match the aspect ratio of the TV. (l 76)

Release the protect setting. (l 69)

Any scenes/still pictures where the thumbnails are

displayed as cannot be deleted. If the scenes/ still pictures are unnecessary, format the media to erase the data. (l 74) Please be aware that if a media is formatted then all the data recorded on the media is erased and cannot be recovered. Back up important data on a PC, disc etc.

If the SD card is formatted on a PC, it may not be recognised by this unit. Use this unit to format SD cards. (l 74)

Check that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card/SDXC Memory Card) that you inserted. Refer to the operating instructions of the device for details.

The unit has automatically detected an error. Restart the unit by turning off and on the power.

The power will be turned off in about 1 minute if the power is not turned off and on.

Repair is needed if it is repeatedly displayed even if it is restarted. Detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the unit by yourself.

105

VQT2L35

Page 105
Image 105
Philips SDR-S50 operating instructions 105