Philips SDR-S50 operating instructions 104

Problem

This unit cannot be operated though it is turned on.

This unit does not operate normally.

The remaining time indication or the elapsed time indication is not shown.

The unit arbitrarily stops recording.

Auto focus function does not work.

Colour balance of images is strange when recording in a place such as a gymnasium.

104

Check points

≥Remove the battery or AC adaptor, wait about

1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the power again. (Conducting the above operation while the media is being accessed may damage the data on the media.)

≥If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased this unit from.

≥If you set [SETUP] > [DISPLAY] > [OFF], indications other than warnings and date etc. are not displayed. (l 25)

≥Use an SD card that can be used for motion picture recording. (l 18)

≥The recordable time may have shortened due to the deterioration of the data writing speed or repeated recording and deletion. Using the unit, format the SD card or HDD (l 74)

SDR-H85

≥If the unit is exposed to strong vibrations or shocks while recording on HDD, recording may stop to protect the HDD. If the unit is used in a place with loud sounds, the recording may stop due to sound vibrations. Recording data on an SD card is recommended in these places.

≥Set to Intelligent auto mode to on.

≥If you are trying to record a scene which is hard to bring into focus in auto focus mode, use the manual focus mode to adjust the focus. (l 33, 58)

≥In a place with multiple light sources, such as a gymnasium or a hall, set the white balance setting to

(Indoor mode2). If you cannot record clearly

with the (Indoor mode2), set it to (Manual adjustment mode). (l 56)

VQT2L35