Philips SDR-S50 To disconnect USB cable, Safely, Charging the battery using USB bus power

∫ To disconnect USB cable		3	SDR-S50
safely			Verify [MATSHITA SDR-S50/SD USB
			Device] is selected and click [OK].
1 Double click the	icon in task tray
			SDR-H85
displayed on the PC.			Verify [MATSHITA SDR-H85/SD USB
≥ Depending on your PC’s settings, this			Device] or [MATSHITA SDR-H85/HDD
icon may not be displayed.
			USB Device] is selected and click
2 Select [USB Mass Storage Device]			[OK].
and click [Stop].

Charging the battery using USB bus power

When using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray disc recorder or Panasonic DVD recorder, the battery will charge.

≥Insert the USB cable securely all the way. It will not operate properly if it is not inserted all the way.

≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)

≥Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder.

≥During charging, the status indicator flashes. When charging is finished, the status indicator turns off.

≥Charging cannot be carried out if the status indicator flashes quickly for about 1 minute and then goes out, or if it does not illuminate at all. Use the AC adaptor to charge. (l 14)

≥Charging will take 2-3 times longer than charging with the AC adaptor.

≥Use the AC adaptor when charging the high capacity battery (VW-VBK360; optional).

≥If the status indicator flashes at a particularly fast or slow rate, refer to page 110.

93

VQT2L35