Connect the AC cable to the AC adaptor, then the AC outlet.

Charging the battery

When this unit is purchased, the battery is not charged. Charge the battery before using this unit.

The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.

The battery will not be charged if the power is turned on.



1 Connect the AC adaptor to this unit’s DC input terminal.

2

For the AC cable, plug in 2 and then 3.

The status indicator will flash red at an interval of 2 seconds, indicating that charging has begun.

14

VQT2L35

Page 14
Image 14
Philips SDR-S50 operating instructions Charging the battery, Connect the AC adaptor to this unit’s DC input terminal