Philips SDR-S50 operating instructions About charging errors, About SD cards

About charging errors

When the status indicator is flashing at a particularly fast or slow rate, the following should be considered.

Flashing with approx. 4 second period (off for approx. 2 seconds, on for approx.

2 seconds):

≥The battery may be over-discharged, or the battery temperature may be high or low. The battery will charge, but it may take several hours for normal charging to begin.

Flashing with approx. 0.5 second period (off for approx. 0.25 second, on for approx. 0.25 second):

≥The battery is not charged. Remove the battery from the unit, and try charging again.

≥Check that the terminals of the unit or battery are not dirty or covered in a foreign object, and connect the battery correctly once again. If a foreign object or dirt is present, turn off the unit before removing.

≥The battery or environment is at an extremely high or low temperature. Wait until the temperature has returned to an appropriate level and try charging again. If you are still unable to charge, there may be a fault in the unit, battery or AC adaptor.

Lamp turns off:

≥Charging has finished.

≥If the status indicator stays off despite the charging being unfinished, there may be a fault in the unit, battery or AC adaptor.

≥Refer to page 109 for details on the battery.

110

About SD cards

≥The memory capacity indicated on the label of an SD card is the total of the capacity for copyright protection and management and the capacity which can be used on the unit, a PC etc.

≥Do not apply strong shocks, bend, or drop the SD card.

≥Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the data stored on the SD card.

≥During long periods of use, it is normal for this unit and the SD card to become slightly warm and is not a malfunction.

When the card access lamp is lit, do not:

jRemove the SD card

jTurn the unit off

jInsert and remove the USB cable

jExpose the unit to vibrations or shock

Cautionary points when handling

≥Do not expose the terminals of the SD card to water, garbage or dust.

≥Do not place SD cards in the following areas:

jAreas exposed to direct sunlight, or in high-temperature areas such near heating equipment.

jIn very dusty or humid areas.

jLocations susceptible to significant difference in temperature (condensation can occur).

jWhere static electricity or electromagnetic waves occur.

≥To protect SD cards, return them to their cases when you are not using them.

When disposing of or giving away an SD card, note that:

≥Formatting and deletion simply change the file management information and cannot be used to completely erase the data in an SD card.

≥We recommend that you physically format an SD card before disposing of or giving away the SD card.

VQT2L35