Guardian Technologies DVST Modem, MODEM2, Sync, MBAUD= Set MODEM port ASYNC baud rate. default

Modems DVST Installation Guide

SYNC

The sync or synchronous mode relies on the modem generating clock signals to the DVST.

MODEM

Modem switches from the command mode CMD> to allow direct control of a connected MODEM. The speed of communication with the MODEM will be as set with the MBAUD= command.

This is called transparent MODEM mode and is terminated by pressing the ESCAPE or ESC key.

MBAUD= Set MODEM port ASYNC baud rate. (default, 19200)

9600, 19200, 38400

This command sets the speed of communication between the DVST and the MODEM when AUX 1 is used for asynchronous mode. The speed of communication in the Synchronous mode is determined by the clock signal supplied by the MODEM.

ASYNC

In the asynchronous mode the MODEM controls the flow of data using

RTS/CTS signals.

MODEM2

Modem switches from the command mode CMD> to allow direct control of a connected MODEM through AUX 1. The speed of communication with the MODEM will be as set with the PORT= command.

This is called transparent MODEM mode and is terminated by pressing the ESCAPE or ESC key.

PORT= AUX1, 19200, N 8 1, MODEM2

Refer Chapter Setup (Basic).

Page 18 Dedicated Micros Ltd