Guardian Technologies DFT 150/175 Send Configuration String, Step Instruction, Send Ret, Remarks

DVST Installation Guide Terminal Adapters

Step Instruction

9Press the enter key, it will read ‘SHOW’. Hold the select until this changes to ‘CHNG’, press the enter key , display will then show ‘DIPS’ for dip switch.

10Press the enter key, it should read ‘INAC’ for inactive, press the select key to change this to ‘ACTV’ for active, press the enter key to return to ‘DIPS’.

11Hold the select key down and press the enter key, this will return unit to ‘CONF’.

12Press the enter key and the display will read ‘PRT1’, press the select key to change this to port 2.

13Press the enter key and ‘SHOW’ will appear, hold the select key for three seconds, the display will change to ‘CHNG’.

14Press the enter key it will change to ‘DIPS’, press the enter key and it will say ‘INAC’, press the select key and ‘ACTV’ will be displayed, press the enter key and display will return to ‘DIPS’.

15Hold the select key and press the enter key, returning the display to ‘CONF’.

SEND CONFIGURATION STRING

16At the command prompt CMD> type

ISDN=ATMODE <RET> DUALISDN=ON <RET> ISDNSTR = CITAM <RET>

At the command prompt CMD> type

SEND <RET>

Wait for the information to be sent to the modem. At the command prompt CMD> type

ISDN0 <RET> AT<RET> AT&W<RET>, <ESC> ISDN1<RET AT<RET>

Remarks

The unit has now had the dip switches made active on both ports 1 and 2.

Dedicated Micros Ltd Page 35