Guardian Technologies DVST, DFT 150/175 manual 13.2Connecting the DAL100, Microphone refer to fig

Audio DVST Installation Guide

13.2Connecting the DAL100

Microphone ( refer to fig. 7 )

Connect the 3.5mm jack plug of the microphone into socket on end panel. Connect the microphone press-to-talk lead to pins 1 and 9 of a 15way male connector and plug into socket on end panel,

Fig: 8 Microphone connection

Speaker ( refer to fig. 8 )

Connect the 3.5mm jack plug of the speaker to the SPEAKER OUT socket.

Power Supply ( refer to fig. 8 )

Connect the power supply to the socket marked PWR on the end panel.

DVST Connection ( refer to fig. 8 )

Using the 9 way to 9 way cable connect the DAL100 unit to port AUX1 on the DVST. (Details are in the cable section of this manual)

Set Port Usage ( refer to SETUP para 5.7 )

Port Aux1 on the DFT0150 sould set to the following:

PORT = AUX1 38400 N 8 1 PKT

Page 54 Dedicated Micros Ltd