Guardian Technologies DFT 150/175 Unpacking the unit, 2.1Items in packing, 2.2Packing the DVST

DVST Installation Guide Unpacking the unit

2 Unpacking the unit

2.1Items in packing

The unit should be carefully unpacked and the packing materials retained. Check that all the contents on the following checklist are present:

θDVST Unit

θPower Lead with molded IEC connector

θRack mount conversion kit

θInstallation Guide

2.2Packing the DVST

If the DVST is to be returned for repair or transported to another location the original packing should be used.

The unit should first be wrapped in the polythene bag. The preformed end pieces are then placed at either side of the unit which can then be placed inside the cardboard box. The box should be firmly sealed using appropriate tape.

If the unit is to be returned for repair ensure a valid returns note is clearly written

on the side of the box.

Dedicated Micros Ltd Page 3